Maclord's Blog

Problem with writing to (NTFS-formatted) USB drives directly connected to your Mac? No more worries. You can solve the problem by enabling read-write (and delete) access to NTFS-formatted drives and flash memories.

It’s been 4 years since I wrote my post “Ability to write to NTFS volumes on the Mac” which presented a free solution to solve the problem to writing to PC drives (or deleting files from them) with NTFS-3G and MacFuse. However, after the release of Mac OS X Lion, and then OS X Mountain Lion shortly thereafter, the suggested free solution became obsolete as the development of the MacFuse driver has been halted, and there’s no longer any official support for newer versions of Mac OS X. A new piece of open-source software called OSXFuse driver was thought to come to the rescue, however even with OSXFuse, NTFS-3G does not function properly in Lion and Mountain Lion; you will still get mounting errors every time your computer boots. So you risk to corrupt your hard drive / SSD and end up with possible data loss.

Why can’t you write to some volumes on the Mac which you also use (read & write) on the PC?

Mac OS X uses a file system called HFS+, whereas Windows uses the FAT32 and NTFS formats (which stands for NT File System) for its drives used for storage. While Mac OS X can read files on NTFS volumes, it can’t write or copy files to them – this includes the Bootcamp partition on your Mac’s hard drive (or SSD), although it can both read & write on FAT32 disks and drives. FAT32 is heading toward its end of life cycle due to its limitations such as that you cannot format a FAT32 volume larger than 32 GB in size, and it cannot hold a single file larger than 4 GB. USB-memory drives with a storage capacity smaller than or equal to 4 GB are ideally formatted FAT32 with which you must be doing just fine on your Mac. However those that are larger have no choice but to have NTFS as their file system with which you’re gonna have this problem of writing on them on Mac OS X.

Fortunately, you can enable your Mac to write to NTFS writing on Mac OS X with relatively little trouble. Read more to find out about the low-cost solution which addresses the problem on Mac OS X Lion and Mountain Lion (aka Mac OS X 10.8).

Enter Paragon NTFS for Mac OS X

Paragon NTFS for Mac solves definitely the problem of mounting NTFS volumes as well as bringing the ability to read and write to those volumes flawlessly. A $19.95-solution from Paragon Software,  it is all you need in order to create, delete or modify any files on Windows NTFS drives (including your Bootcamp partition on your Mac if you installed Windows Vista or Windows 7 or later using the Bootcamp Utility) – and you won’t even remember there was ever a problem. Remove the barriers between NTFS and HFS with ease and confidence and no more worries about corrupting volumes and losing data.

Paragon NTFS has also been the first solution to support Mac OS X 10.8 Mountain Lion.
Read the rest of this entry »

I just bought a 15″ Retina MacBook Pro and solely for the purpose of development for IBM Websphere suite of products, especially IBM BPM and ODM (aka Websphere Operational Decision Management). IBM BPM consisting of heavy-weight components based on a process server built on top of Websphere Application Server 8, requires very powerful hardware to work with efficiently. But all these products require Windows, Linux or UNIX operation systems, so I needed to setup Bootcamp on my new Mac to install and run Windows 7 for these tasks. (This is another story I will be sharing on my IT blog soon.)

Since the new Macs no longer ship with any software installation discs, everything is downloaded from the Internet inlcluding OS X software as well as Bootcamp support (Windows driver software for Mac hardware). As a loyal Mac OS X Snow Leopard user who has been resisting to upgrade to (Mountain) Lion for a long time, with my new Retina MacBook Pro, I had no choice, but to get used to working on Mountain Lion. This includes the Bootcamp utility Mountain Lion edition (as I call it) which requires to download the Bootcamp (Windows support) drivers online (and on the fly) while setting up Bootcamp on the Mac.

In my experience, downloading the Bootcamp drivers from some Apple server took more than half a day. In order to avoid such a time loss (or any possible new Apple madness) next time  I’d set up Bootcamp, I backed up the downloaded the Bootcamp drivers, and then I decided I’d share the near-1-GB folder zipped in a single file with the rest of the world for download via my web site which is hosted on reasonably fast servers with high bandwidth (courtesy of Ozar.net).

Read the rest of this entry »

You got your new iPhone or new iPad, then a time came when you wanted to have some extra-ordinary file on your PC or your android device to be opened up on your other device and it turned out that iTunes will not sync it or you just don’t wanna bother transferring the file first to iTunes and then whatever.

Dropbox comes to the rescue. Thanks to Dropbox, once you put any file in it whether you are on your computer, or your mobile device, it will store them in the cloud and sync it to all of your devices such as your PC, Mac, iPhone, iPad, iPod Touch even devices running on Android, Windows Phone 7, Blackberry and  Linux. What’s more, you can use Dropbox not only for personal synchronization needs, but also for sharing files with others and collaboration in real-time. Dropbox offers both free and paid services.

Why DropBox?

There are dozens of other applications either as SaaS or PaaS and all claiming to get the same job done. Among all, Dropbox was and still the best and painless (even Apple attempted to buy Dropbox before their iCloud venture – an argument for another post) I’ve ever used. It’s fast, easy-to-use, practical – the only downside of it is on mobile devices where it doesn’t push the content unlike iCloud, you need to be connected to Internet to access all your files except for the one or two which once you access it on your mobile device is/are cached for offline viewing.

Dropbox replaces

• Emailing file attachments to yourself and other people
• Using USB drives to move files between computers
• Renaming files to keep a history of previous versions
• Complicated backup software and hardware

How Dropbox works

Here’s a short video explaining how it works:

How do I get Dropbox for free?

For a starter you can sign up for a free 2 GB account (if you use my referral code, you will get an additional 250 MB)

Read the rest of this entry »

If you’re a heavy user of Apple Mail.app, you may find that over time the program takes longer and longer to open, and operates more and more sluggishly.

There’s a trick to making things faster, one that never fails to work. Open Terminal and run the following command:

sqlite3 ~/Library/Mail/Envelope\ Index vacuum

This command basically cleans old and discarded crud out of the database that Mail
uses to keep track of messages. When old messages are deleted, Mail unfortunately
keeps some information about them around, and that’s what you’re nuking from orbit.
Here’s an example on my machine that shows the before and after

$ cd ~/Library/Mail
$ ls -l
-rw-r--r-- 1 maclord staff 61M Feb 15 23:14 Envelope Index
$ sqlite3 ~/Library/Mail/Envelope\ Index vacuum
$ ls -l
-rw-r--r-- 1 maclord staff 33M Feb 16 18:35 Envelope Index

If you would run it often on the Terminal, make an alias for it, either in .bashrc or
.bash_aliases

alias vacuummail=‘sqlite3 ~/Library/Mail/Envelope\ Index vacuum’

If you’re really feeling ambitious, you could create an Automator action that would shut
down Mail, run the command, and start Mail back up. You could even make it an iCal Alarm and set it to
run once a week, and you will guarantee that Mail runs lean and mean. Or, if you don’t
like Automator, use a tool like Lingon to run the command for you at a set time.

P.S. These methods have been tested with Mac OS X (10.6) Snow Leopard – untested with Lion (OS X 10.7)

Manomio a mobile software developer company with the motto “in retro we trust” has come up with a Commodore Amiga Emulator for iOS which will enable users of iPhone, iPad and iPod Touch to play Commodore 64 and Amiga games on their iOS devices.

Manomio is in the course of some legal procedures to license the required intellectual property and is also working with individual developers to bring popular Amiga titles to Apple’s App Store.
The following demonstration video shows a collection of 10 classic Amiga games such as Defender of the Crown, Battle Squadron, International Karate Plus, R-Type, R-Type II, Speedball, Stunt Car Racer, Shadow of the Beast, Virus, and Xenon 2: Megablast:

Popular among Windows PC users .Uif is an alternative disk image format to others like .iso, .img and .bin-.cue couples.

You can open and convert UIF disk images on Mac OS X using one of the following disk image utilities:

1. Uif2iso which is a cross-platform command-line tool developed by Luigi Auriemma.
2. Uif2iso4mac a GUI application by Torsten Curdt . Uif2iso4mac is built upon  Luigi Auriemma’s uif2iso command line utility with a Mac graphic user interface adding basic functionalities of a real Mac app like drag-and-drop and a menu bar i.e. choosing an image using the File > Open menu.

Read the rest of this entry »

Here’s an easy trick to make if you want to transfer a website you’ve made on Mac using iWeb to another Mac to continue editing with iWeb on that Mac.

1. Exit iWeb on the first machine (where you created the web site).
2. Using the finder, go to your home folder, open your Library folder, then open the Appliation Support folder.
3. Copy the iWeb folder to a thumb drive and take that to the other machine (or find some other way to copy the entire folder to the other machine). (If you don’t see an iWeb folder then check to see that you are not looking in the system Library folder.)
4. On the second machine, drag this folder to your own Library/Appliation Support folder, replacing any iWeb folder already there. (Be sure iWeb is not running there too.)
5. Finally, launch iWeb, and you can now edit the web site on the second machine.

See

http://macamour.com/blog/2009/01/15/transfer-an-iweb-website-from-a-mac-to-another/

also

http://discussions.apple.com/thread.jspa?threadID=2193783&tstart=0

Although a beta version of the new, popular, long-awaited web browser Google Chrome for the Mac has already been released, the download page file has been removed from Google’s own search results.

Luckily I had downloaded a beta version and already using it. You can download it here for your own hands-on experience on Google Chrome on your Mac.

Download Google Chrome for Mac (latest beta) (394) for Mac OS X (supposedly for Intel only)

Google Chrome is made possible by the Chromium open source project and some other open source software.

You may also want to look into

Mac OS X version 10.6 Snow Leopard